Filter
Top Products
EN 9
Master Page: Right
How To Attach The Strap
1 Following the illustration, thread the strap
through the eyelet a.
2 Fold it back and thread it through the buckle b.
3 Repeat the procedure to attach the other end of
the strap to the other eyelet c.
4 Confirm the strap is not twisted.
NOTE:
When the Pro pad is used (੬ pg. 10), attach the
strap to the eyelet c and the eyelet on the Pro pad.
How To Attach The Handle
Mount the Handle on the Shoe and tighten the
screw. You can attach the optional Video Light or
Stereo Microphone to the Shoe on the Handle or on
the camcorder’s Shoe. When using the Microphone
or Video Light, refer also to its instruction manual.
How To Use The Audio Cable
When using optional headphones or external
microphone, connect to the provided audio cable
(with a core filter attached), then connect the audio
cable to the camcorder. The core filter reduces
interference.
Screw
Microphone
Audio cable
(provided)
Core filter
Open the connector cover.
To (headphones)
Headphones
To MIC
JY-HD10US.book Page 9 Tuesday, April 22, 2003 8:18 AM