Filter
Top Products
Mounting the Camera
Selecting a mounting method
v
Mount directly to the ceiling or on the wall (A page 13)
v
Mounting the Camera Using the Conduit Hole at the Bottom of the Base
(A page 19)
v
Mounting the Camera Using the Conduit Hole at the Side of the Base
(A page 21)
v
Mounting the Camera using the Electrical Box (A page 22)
Memo
When mounting the camera to the ceiling, ensure to wear safety glasses
to protect the eye from any falling objects.
Mounting the camera directly to the ceiling or on the wall
When mounting to a wall, replace areas indicated as "ceiling" in the procedures by
"wall".
m
Preparing the camera
1
Remove the dome cover (screws x3)
2
Remove the inner dome from the catches (two locations)
The inner dome can be easily removed by turning it about 45 degree and grip
from both sides near the catches as illustrated in the diagram.
.
.
1
2
Inner dome
Catches ( 2)
Wrench (supplied)
Fall prevention
wire
Doom cover
Installation
13