Filter
Top Products
Adjusting Image (Continued)
6
Fine adjust the focus
① Press and hold the [J] button.
v
Focus adjust mode will be activated and "FOCUS ADJUST MODE" is
displayed on the monitor screen.
v
The contours are emphasized as the iris opens and the depth of field
becomes shallow.
v
After adjustment, press [ K, H, I]/[SET]/[MENU] to exit focus adjust mode.
The mode is also automatically deactivated after about 30 seconds.
Memo
v
During the focus adjust mode, the electronic shutter will function
automatically. As a result the screen will appear grainy. This is not a
malfunction.
② Shoot the subject.
③ Return the catch to A in the diagram, and then rotate the knob to adjust the
focus to the optimum position.
④ Rotate the focus adjust gear knob one base pitch in the direction of the arrow
in the diagram to correct the focus shift when mounting the dome cover.
⑤ Peel off the protection sheet temporarily and cover the dome cover to check
the focus. After checking, paste the protection sheet back on the dome
cover.
.
.
A
Catch
Knob
One base pitch
Adjustment
26