Filter
Top Products
54 EN
Master Page: Left
To use this camcorder as a recorder
Dubbing from other devices in MPEG2 format is
possible if the connected device is another same
model of this unit.
1 Perform step 1 to 4 of “To use this camcorder as a
player” (੬ pg. 53).
2 Set “REC MODE” to “SP” or “LP”. (੬ pg. 33, 34)
3 Turn on the video unit’s power.
4 Insert the source cassette in the video unit.
5 Insert the recording cassette in this camcorder.
6 Press the Recording Start/Stop Button to engage
the Record-Pause mode.
● The “ ” indication appears on the
screen.
7 Press the Recording Start/Stop Button to start
recording.
● The indication rotates.
8 Press the Recording Start/Stop Button again to
engage the Record-Pause mode.
● The indication stops rotating.
9 Repeat steps 7 – 8 for additional editing. Stop the
video unit and camcorder.
NOTES:
DV to DV dubbing
● If a blank portion or disturbed image is played
back on the player during dubbing, unusual
images may be dubbed or the dubbing may stop.
MPEG2 to MPEG2 dubbing
● It is not possible to dub signals in MPEG2 format
from devices other than another same model of
this camcorder.
● MPEG2 signals that are copy-guarded may not be
recorded with this camcorder.
● When dubbing MPEG2 video to the camcorder,
image may not appear on the LCD monitor or
viewfinder. However, the recording is performed
properly.
i.LINK IN
DUBBING (cont.)
GR-PD1PAL.book Page 54 Tuesday, June 17, 2003 7:31 PM