Filter
Top Products
MasterPage: Heading0_Left
26 EN
ADDITIONAL FEATURES FOR D.S.C.
By resetting the file name, a new folder will be
made. The new files you are going to make will
be stored in the new folder. It is convenient to
separate the new files from previously made
files.
1 Perform steps 1 – 3 in “Normal Playback Of
Images”. (੬ pg. 24)
2 Press MENU. The Menu Screen appears.
3 Press 4, 3, 1 or 2 to select “NO. RESET”,
and press SET. The NO. RESET screen
appears.
4 Press 4 or 3 to select “EXECUTE”, and
press SET. The new folder (such as
“101JVCGR”) will be made and the file name of
the next shot starts from DVC00001.
NOTE:
If the file name reaches DVC09999, a new folder
(such as “101JVCGR”) will be made and the file
name will start again from DVC00001.
The Protect mode helps prevent the accidental
erasure of files.
1 Perform steps 1 – 3 in “Normal Playback Of
Images”. (੬ pg. 24)
2 Press MENU. The Menu Screen appears.
3 Press 4, 3, 1 or 2 to select “PROTECT”, and
press SET. The PROTECT Menu appears.
To protect the currently displayed file
4 Press 4 or 3 to select
“CURRENT”, and press
SET or
2. The PROTECT
screen appears.
5 Press 1 or 2 to select
the desired file.
6 Press 4 or 3 to select
“EXECUTE”, and press
SET.
●
To cancel protection,
select “RETURN”.
● Repeat steps 5 and 6 for
all files you want to
protect.
To protect all files stored in the memory card
4 Press 4 or 3 to select “PROT.ALL”, and press
SET or
2. The PROTECT screen appears.
5 Press 4 or 3 to select “EXECUTE”, and
press SET.
●
To cancel protection, select “RETURN”.
NOTES:
● If the “ ” mark appears, the currently displayed
file is protected.
● When the memory card is initialized or corrupted,
even protected files are deleted. If you do not want
to lose important files, transfer them to a PC and
save them.
To Remove Protection
Before doing the following, perform steps 1 – 3
in “Protecting Files”.
To remove protection from the currently
displayed file
4 Press 4 or 3 to select “CURRENT”, and
press SET or
2. The PROTECT screen appears.
5 Press 1 or 2 to select the desired file.
6 Press 4 or 3 to select “EXECUTE”, and
press SET.
●
To cancel selection, select “RETURN”.
● Repeat steps 5 and 6 for all files you want to
remove protection.
To remove protection from all files stored in
the memory card
4 Press 4 or 3 to select “CANC.ALL”, and
press SET or
2. The PROTECT screen appears.
5 Press 4 or 3 to select “EXECUTE”, and
press SET.
●
To cancel selection, select “RETURN”.
Resetting The File Name
Protecting Files
GR-D372US_EN.book Page 26 Tuesday, August 29, 2006 9:24 AM