Filter
Top Products
EN 35
FEATURES FOR RECORDING
MasterPage: Start_Right
ADVANCED FEATURES
Manual exposure control is recommended in the
following situations:
●
When shooting using reverse lighting or when the
background is too bright.
● When shooting on a reflective natural background
such as at the beach or when skiing.
● When the background is overly dark or the subject
is bright.
1 Set the Power Switch to “REC”.
2 Set the recording mode to “ ”. (੬ pg. 15)
3 Set “EXPOSURE” to “MANUAL” in
FUNCTION Menu. (੬ pg. 29)
●
The exposure control menu appears.
4 To brighten the image, press 3. To darken the
image, press 4. (maximum ±6)
●
+3 exposure has the same effect as the backlight
compensation. (
੬ pg. 36)
● –3 exposure has the same effect as when
“PROGRAM AE” is set to “SPOTLIGHT”.
(
੬ pg. 38)
5 Press SET or 2. Exposure adjustment is
complete.
To return to automatic exposure control
Select “AUTO” in step 3.
NOTES:
● You cannot use the manual exposure control at
the same time when “PROGRAM AE” is set to
“SPOTLIGHT” or “SNOW” (
੬ pg. 38), or with the
backlight compensation.
● If the adjustment does not cause any visible
change in brightness, set “GAIN UP” to “AUTO”.
(
੬ pg. 29, 31)
Like the pupil of the human eye, the iris
contracts in well-lit environments to keep too
much light from entering, and dilates in dim
environments to allow in more light.
Use this function in the following situations:
●
When shooting a moving subject.
● When the distance to the subject changes (so its
size in the LCD monitor or the viewfinder
changes), such as when the subject is backing
away.
● When shooting on a reflective natural background
such as at the beach or when skiing.
● When shooting objects under a spotlight.
● When zooming.
1 Set the Power Switch to “REC”.
2 Set the recording mode to “ ”. (੬ pg. 15)
3 Set “EXPOSURE” to “MANUAL” in
FUNCTION Menu. (੬ pg. 29)
●
The exposure control menu appears.
4 Adjust zoom so that the subject fills the LCD
monitor or the viewfinder, then press and hold
SET or 2 for over 2 seconds. The “” indication
appears.
5 Press SET or 2. The iris is locked.
6 Press MENU. The Menu Screen closes. The
“” indicator appears.
To return to automatic iris control
Select “AUTO” in step 3.
●
The exposure control indicator and “”
disappear.
To lock the exposure control and the iris
After step 3, adjust the exposure by pressing 3
or 4. Then lock the iris in steps 4 – 6. For
automatic locking, select “AUTO” in step 3. The
exposure control and the iris become automatic.
Exposure Control
Operation Mode VIDEO MEMORY
Exposure Level ± 0
± 1
± 2
± 3
± 4
± 5
± 6
± 0EV
± 0.3EV
± 0.7EV
± 1.0EV
± 1.3EV
± 1.7EV
± 2.0EV
Iris Lock
GR-D372US_EN.book Page 35 Tuesday, August 29, 2006 9:24 AM