JVC LYT1624-001B Digital Camera User Manual


 
MENUS FOR DETAILED ADJUSTMENT
30 EN
MasterPage: Left
FUNCTION
The following menu settings can be changed
only when the Power Switch is set to REC.
[ ] = Factory-preset
( pg. 37), Wipe or Fader Effects
( pg. 38), Program AE, Effects and Shutter
Effects
( pg. 38), Program AE, Effects and Shutter
Effects
( pg. 38), Program AE, Effects and Shutter
Effects
( pg. 35), Exposure Control
( pg. 36), White Balance Adjustment
[OFF]: Disables the function.
ON: When the distance to the subject is less
than 1 m (3.3 ft), set TELE MACRO to ON.
You can shoot a subject as large as possible at a
distance of approx. 40 cm (1.4 ft).
Depending on the zoom position, the lens may go
out of focus.
SETTING
The following settings are effective when the
Power Switch is set to REC.
[ ] = Factory-preset
[SP]*: To record in the SP (Standard Play) mode
LP: Long Playmore economical, providing 1.5
times the recording time.
* SP indicator does not appear on the screen.
NOTES:
If the recording mode is switched, the playback
picture will be blurred at the switching point.
It is recommended that tapes recorded in the LP
mode on this camcorder be played back on this
camcorder.
During playback of a tape recorded on another
camcorder, blocks of noise may appear or there
may be momentary pauses in the sound.
[12BIT]: Enables video recording of stereo
sound on four separate channels. (Equivalent to
the 32 kHz mode of previous models)
16BIT: Enables video recording of stereo sound
on two separate channels. (Equivalent to the
48 kHz mode of previous models)
OFF: Disables the function.
[ON ]: To compensate for unstable images
caused by camera-shake, particularly at high
magnication.
NOTES:
Accurate stabilization may not be possible if hand
shake is excessive, or depending on the shooting
condition.
The “” indicator blinks or goes out if the
Stabilizer cannot be used.
Switch off this mode when recording with the
camcorder on a tripod.
* Available only when the VIDEO/MEMORY Switch
is set to VIDEO.
[SNAP]: Snapshot mode
SLOW : Live Slow mode
For details on the procedure, refer to Live Slow
( pg. 33) and Snapshot (Record Still Image
On Tape) ( pg. 34).
* Available only when the VIDEO/MEMORY Switch
is set to VIDEO.
[32X]: When set to 32X while using digital
zoom, the zoom magnication will reset to 32X
since digital zoom will be disengaged.
64X*: Allows you to use the Digital Zoom. By
digitally processing and magnifying images,
zooming is possible from 32X (the optical zoom
limit), to a maximum of 64X digital magnication.
900X*: Allows you to use the Digital Zoom. By
digitally processing and magnifying images,
zooming is possible from 32X (the optical zoom
limit), to a maximum of 900X digital
magnication.
* Available only when the VIDEO/MEMORY Switch
is set to VIDEO.
Recording Menus
WIPE/FADER
EFFECT
PROGRAM AE
SHUTTER
EXPOSURE
W. BALANCE
TELE MACRO
REC MODE
SOUND MODE
DIS*
SNAP/SLOW*
ZOOM*
GR-D372US_EN.book Page 30 Tuesday, August 29, 2006 9:24 AM