Filter
Top Products
EN38
Trouble Action
Recording
Recording cannot be
performed.
•
SD Card or Built-In Memory is full. Delete unnecessary files or
replace the SD Card.
Recording stops by
itself.
•
Insert a commercially available SD card, and set each of the
[REC MEDIA FOR VIDEO] to [SD CARD] and [REC MEDIA FOR
IMAGE] to [SD].
•
Recording stops automatically after 12 hours of continuous
recording.
Playback
Sound or video are
interrupted.
•
Sometimes playback is interrupted at the connecting section
between two scenes. This is not a malfunction.
Cannot find a recorded
video/image.
•
Select [PLAYBACK MPG FILE] then search the video on the index
screen.
(Video files that have damaged management information can be played back.)
•
Cancel group display and date search functions.
•
Change the setting in [REC MEDIA FOR VIDEO] or [REC MEDIA
FOR IMAGE]. (Files on other media are not displayed.)
•
Slide the mode switch to select the desired mode ( or ).
Other Problems
The lamp does not
flash during battery
pack charging.
•
Check the remaining battery pack charge.
(When the battery pack is fully charged, the lamp does not flash.)
•
When recharging in either a hot or cold environment, ensure that
battery is being charged within the permitted temperature range.
(If the battery pack is being recharged outside the permitted temperature
range, recharging may stop to protect the battery pack.)
Cannot upload the file
to YouTube
™
•
You need your YouTube™ account to upload files to YouTube™.
Create your account.
•
Refer to “Q&A”, “Latest Information”, “Download Information”, etc.
in [Click for Latest Product Info] in the help of the provided Everio
MediaBrowser software.
Cannot export the file
to iTunes
®
•
Refer to “Q&A”, “Latest Information”, “Download Information”, etc.
in [Click for Latest Product Info] in the help of the provided Everio
MediaBrowser software.
To reset the camcorder when it does not operate normally
Close the LCD monitor and remove the power supply (battery pack or AC adapter) from the
camcorder, then reattach it.
Execute [FACTORY PRESET].
Troubleshooting (Continued)
GZ-MS130BU_US_IB_ENB.indb 38GZ-MS130BU_US_IB_ENB.indb 38 4/28/2008 11:44:26 AM4/28/2008 11:44:26 AM