JVC LYT2044-001C-M Camcorder User Manual


 
39
EN
Warning Indications
Indication Action
SET DATE/TIME!
Set the clock. If the message still appears after setting the
clock, the battery for the clock has been depleted. Consult your
nearest JVC dealer.
COMMUNICATING ERROR
Be sure to use JVC battery packs.
CANNOT USE IN
VIDEO MODE
Set [REC MEDIA FOR VIDEO] to [HDD].
Replace the microSD card. (Files recorded with other devices
that support AVCHD cannot be played back on this camcorder.)
NOT FORMATTED
Select [OK] and select [YES] to perform formatting.
FORMAT ERROR!
Check the operating procedure, and perform once again.
Turn off the camcorder, and turn it on again.
DATA DELETION ERROR
HDD ERROR!
Perform formatting. (All data is deleted.)
Turn off the camcorder, and turn it on again.
MEMORY CARD ERROR!
Perform formatting. (All data is deleted.)
Remove and re-insert the microSD card. (MultiMediaCard
cannot be used.)
Remove any dirt from the microSD card terminals.
Insert the microSD card before switching the power on.
Turn off the camcorder, and turn it on again.
CANNOT TAKE MORE STILL
IMAGES AT THE MOMENT
Stop video recording, and then record a still image. (If an
microSD card is removed or inserted during video recording, a
still image cannot be recorded.)
DROP DETECTION WORKED AND
THE POWER IS TURNED OFF
Set [REC MEDIA FOR VIDEO] to [SD], then record to a
microSD card.
Turn off the camcorder and turn it on again.
Prevent the camcorder from vibration and shock.
RECORDING CANCELLED
RECORDING FAILURE
microSD card:
Remove and re-insert the microSD card. (MultiMediaCard
cannot be used.)
Remove any dirt from the microSD card terminals.
Insert the microSD card before switching the power on.
HDD:
Do not allow the camcorder to be subject to impact/vibrations.
PLAYBACK FAILED