Filter
Top Products
4
Read This First!
How to Select an Item Using the
Touch Sensor
An example screen in English is used for the
guidance below.
E.g. Selecting an item from the menu list
(on the menu screen)
MENU
IMAGE QUALITY
GAIN UP
SHUTTER MODE
BASIC SETTINGS
Q Touch the MENU button.
R Slide your finger up and down on the
sensor.
S Touch the OK button.
CAUTION
Touch the sensors with your finger. The
sensors do not function if you touch them with
your fingernail or with gloves on.
On-screen function guide
The on-screen function guide is displayed at
the bottom of the screen during menu display,
etc.
EDITED COPY
CHANGE EVENT REG.
CHANGE REGISTERED EVENT
EDIT PLAYLIST
BASIC SETTINGS
Make a backup of important
recorded data
JVC will not be responsible for any lost
data. It is recommended to copy your
important recorded data to a DVD or other
recording media for storage. (Z pg. 14)
Make a trial recording
Before the actual recording of important
data, make a trial recording and play back
the recorded data to check that the video
and sound have been recorded correctly.
We recommend you to use the same
recording media when performing both the
trial recording and the actual recording.
Reset the camcorder if it does
not operate correctly (Z pg. 17)
Precautions on handling
batteries
•
Be sure to use the JVC BN-VF808U/
VF815U/VF823U battery packs.
•
If the camcorder is subjected to
electrostatic discharge, turn the power off
before using it again.
If a malfunction occurs,
stop using the camcorder
immediately and contact
www.jvc.com or by phone at
1-800-252-5722.
Recorded data may be erased while the
camcorder is being repaired or inspected.
Back up all data before requesting repairs
or inspections.