Filter
Top Products
Menu Settings
3.9 DAY/NIGHT
The camera will automatically switch to B/W mode when the illumination is under a certain threshold.
There is no need to adjust this setting.
Under B/W mode, you can set BURST to be ON or OFF.
3.10 NR
NR allows you to configure the DNR (Digital Noise Reduction) settings to reduce noise on the screen. In
the NR submenu, you can enable the NR MODE to the Y (BRIGHT) / C (COLOR), C LEVEL or Y LEVEL
mode. According to your NR mode, you can adjust Y LEVEL or C LEVEL as required.
Note: When the Y Level is higher the noise in dark areas becomes lessened. Also, resolution will
become lower. When it is lower, there is more noise in dark areas.
3.11 CAMERA ID
CAMERA ID displays ON or OFF. The default setting is OFF. You can set the ON mode to add a camera
title up to 26 characters with 2 lines and also select where the title appears on the monitor screen.
3.12 LANGUAGE
OSD supports 8 multiple languages. Options include ENGLISH (default), JAPANESE, GERMAN,
FRENCH, RUSSIAN, PORTUGUESE, SPANISH and SIMPLIFIED CHINESE.
3.13 CAMERA RESET
To restore factory defaults, select CAMERA RESET and then press the joystick control.
3.14 SAVE ALL
SAVE ALL items allows you to save all settings and exit the OSD menu.
NRMODEY/C
YLEVEL000
CLEVEL000
RETURN
13