Filter
Top Products
11
Names of VN-C3WU parts
10BASE-T10BASE-T
DC12VDC12V
Rear view
DC IN jack
10BASE-T port
Body
Alarm IN/OUT jack
Side view
Front view
Lens coverLens unit
VN-C3WU Installation and Setup
Before starting installation and setup
It is necessary to set an IP address for each VN-C3WU unit. Use the following procedure for the
setup of individual units. (If the power is not turned on, the installation operation can be performed
at one time.)
1. Install the VN-C3WU.
Only in cases of installation in a location where the power cannot easily be turned on,
complete steps 2 to 4 before installing.
2. Connect the VN-C3WU to a network.
(With the VN-C3WU power turned on.)
3. Set the VN-C3WU IP address.
When setting the VN-C3WU IP address, be sure to contact the network manager for
assignment or approval.
4. Alarm IN/OUT connection.
5. VN-C3WU access test.
This test is performed after any change to confirm the IP address.
VM-C3WU_E.65J 00.10.12, 7:13 PMPage 11 Adobe PageMaker 6.5J/PPC