Filter
Top Products
41
Color balance is
unsatisfactory.
• Try changing the Camera Auto/Manual
setting in the VN-C3WU Settings Page from
Auto to Manual, and then back to Auto
again.
When changing between scenes with
different light sources (for example, when
moving from outdoors with sunlight to
indoors with fluorescent lighting), there may
be a slight delay before the automatic
tracking white balance function starts to
operate.
Depending on the subject, the color balance
may appear to change slightly. This is not a
malfunction.
This product uses auto white balance. When
most of a subject is red, blue-green areas
may appear bluish; blue areas may appear
orange; and yellow areas may appear blue-
purple. In such cases, use the color balance
image quality setting to adjust the color
matching.
Image size and position
change spontaneously.
This sometimes appears to be the case when
multiple operators and administrators have
access to one VN-C3WU unit and change the
settings because the last settings made will
still be in effect for the next user.
Focus is not accurate. The autofocus may not be accurate in dark
places and in locations without features, such
as a wall, etc. In such cases, adjust the focus
manually.
Focus may be slightly off when adjusted
manually at the TELE setting. This is not a
malfunction.
Due to its principle of operation, autofocus is
difficult with striped subjects.
VM-C3WU_E.65J 00.10.12, 7:13 PMPage 41 Adobe PageMaker 6.5J/PPC