Filter
Top Products
31
(TV) is applicable to VN-V series only. (TX) is applicable to VN-X series only.
A Action For specifying the type of action.
Disable : Does not trigger any action.
Mail :Sends out e-mail. Specify the recipient’s mail address. The title
of the mail will appear as [Alarm from Amodel nameB] (E.g.,
AVN-V225B is displayed for VN-V225VPU) and the sender as
[Camera ID]. Enter the message to send in [Mail Text]. Input up
to 127 alphanumeric characters. To attach the latest image to
the mail, set [Attach Image] to AOnB.
FTP : Sends out pre-/post-recorded JPEG files via FTP. See the page
on Alarm Environment for details on pre-/post-recording and
FTP server settings. (A Page 34)
The maximum transmission rate of FTP is 1 Mbps. If a new FTP
trigger occurs during post-recording, the recorded portion is
treated as pre-recording and a new post-recording starts.
During FTP transmission after completing the post-recording, a
new post-recording starts if a new FTP trigger occurs.
TCP : Sends out the character string entered in the [TCP/UDP Data]
field to the destinations specified in [TCP/UDP IP Address] and
[TCP/UDP Port Number] via TCP.
UDP : Sends out the character string entered in the [TCP/UDP Data]
field to the destinations specified in [TCP/UDP IP Address] and
[TCP/UDP Port Number] via UDP.
Output 1 Make : Changes Alarm Output 1 to Make.
Output 1 Break : Changes Alarm Output 1 to Break.
Output 2 Make : Changes Alarm Output 2 to Make.
Output 2 Break : Changes Alarm Output 2 to Break.
Set the alarm output time in the [Alarm Output Duration]
field.
Position (TX) : Moves to the preset position specified in the Action
Position No. item E.(A Page 32)
Play Audio (This feature is not available in VN-V25U)
: Play back an Audio File registered on the camera.
(A Page 29)
(The following setting values are for VN-V26U, VN-V225U series and VN-
X235U series.)
BlackWhite B Color
: Changes the [B&W Mode] setting from ABlack and
WhiteB to AColorB.
Color B BlackWhite
: Changes the [B&W Mode] setting from AColorB to ABlack
and WhiteB.
DayNight:Auto Low
: Changes the [B&W Mode]setting to AAuto LowB.
DayNight:Auto Mid
: Changes the [B&W Mode] setting to AAuto Mid
B.
DayNight:Auto High
: Changes the [B&W Mode] setting to AAuto HighB.