Filter
Top Products
QuickPan III / IV Rotator Base
Tripod threaded bushing adapter
The QuickPan III / IV Rotator Bases comes
with a tripod adapter bushing which ac-
commodates both 1/4 inch and 3/8 inch
tripod mounts.
1/4 inch Tripod
If your tripod has a 1/4 inch threaded
mount, leave the brass bushing in the
center hole in the bottom of the rotator as
shown at right.
3/8 inch Tripod
If your tripod has 3/8 inch threaded mount,
remove the brass bushing by unscrewing it
in a counterclockwise direction and screw-
ing it into the adjacent hole in a clockwise
direction using a coin (or large screwdriver)
as shown at right.
Use the spare outer hole to store the brass
bushing when you're using the 3/8 inch thread.
That way, you won't lose the bushing!