Kambrook KET99 Digital Camera User Manual


 
Do not open the timer.There are no user serviceable
parts inside.Authorised service personnel must perform
repairs only.
Use a soft cloth to clean casing and display.
Do not use chemical or scouring agents.
Do not submerge in water.
Keep device out of reach of children.
Do not use near flammable gases or liquids.
Important
Before using the timer,the tag needs to
be removed from the battery back-up
compartment. Loosen screw securing the
battery cover and gently slide the tag
out from between the contact and the
battery. Retighten the screw to secure
the battery cover.This is a similar
procedure for replacing the battery,
remove the cover and lift the battery
from within the contacts. Insert a new
battery of the same type (alkaline button
cell L1131), observing the correct polarity
(+/–) as shown on the battery cover.
After Installing the battery the unit may be programmed
before plugging into the power source