Filter
Top Products
For each ON time and each OFF time, the day, hours and
minutes must be set.
Press the PROG Button once to set the first ON time –
you will see ON and number “1” appear on the left of
the LCD display.
This indicates that you can now enter the first ON time.
Press the DAY button to choose the required day, or
block of days and then set the hour and minutes using
the HOURS and MIN buttons.
When you have completed setting the required ON time
press the PROG button to validate the entry and move
onto the first OFF time – you will see OFF and the
number “1” appears on the left of the LCD display.
This indicates that you can now enter the first OFF time
by using the DAY, HOURS and MIN buttons as above.
Press the PROG button to validate this entry.
Repeat for the remaining 7 ON /OFF settings as required.
When you have set the required ON / OFF settings,
press the CLOCK button to return the display to the
clock.The Timer will now be ready to operate.
To activate the timing programs, set the timer to Auto off
Mode, by pressing the MANUAL button. For details,
please read the MANUAL OVERRIDE section.
Note that you can check the settings you have programmed
by pressing the PROG button repeatedly – each setting will
appear on the screen.
When checking your programs, ensure that the settings
do not overlap, especially when using the block option.