Filter
Top Products
36
DVR-6300 (EN/K,P,E,X)
Operations
Note
Note
Note
Note
0
E
Program
STER. BYPASS
E
0: 56: 18
TRACK 1
TRACK 2
TRACK 3
TRACK 4
TRACK 12
TRACK 8
TRACK 10
TRACK 3
TRACK 5
TRACK 6
TRACK 7
TRACK 8
Program
CD
Clear All
Program play
You can listen to the desired tracks of the current CD or VCD in any desired order.
Program Edit
1 Insert a disc and close the tray.
2 Press P.MODE key to enter the Program edit
mode.
Program edit screen appears.
5 You can select maximum 30 values by repeating
step 3 - 4.
6 Press Cursor right (3) key.
The programmed track you selected last is highlighted on
the program list.
7 Select the track you want to start playing on the
Program list.
÷ MP3/WMA program playback q
÷ The unit stops when the STOP (7) key is pressed. To restart
program play, press the PLAY key.
÷ Press P.MODE key to exit the Program edit mode.
3 Select specific track by press Cursor up/down
(5/∞) keys.
4 Press ENTRE key to register selected value
onto Program list.
To repeat program play
During program playback, press the REPEAT
key on the remote.
Each press the key switches the mode.
1 "TRACK" : repeats the current track.
2 "ALL" : repeats all the tracks on programmed list.
3 "OFF" : repeat off
Program list
Track list
Example of CD playback
8 Press PLAY key to start.
Playback begins in the order in which you programmed
tracks. Playback stops after all of the tracks on the
Program list have played once.
P.B.C. on mode of VCD, the Program play function
does not work.
*
If you press SKIP (¢) once during Repeat Track
playback, the repeat playback cancels.
Lit
÷ Press TOP MENU to move to the next page.
÷ Press MENU to move to the previous page.
*5476/36-37/EN 04.7.27, 2:06 PM36