Kodak 1500 Camera Accessories User Manual


 
KODAK 1500 Intraoral Camera User’s Guide (8G7939) 31
4 Acquiring, Reviewing,
and Storing Images
You can acquire images using the camera and a video monitor
or computer. With the computer and the acquisition module, you
can manipulate, label, and store images on your computer.
Acquiring Images Using a Video Monitor
When you acquire images using the camera with a video
monitor, you can view live video and captured images. You can
store up to 12 images in the docking station or an additional
10000 images on the SD card in the docking station.
If you want to manipulate, label, or store images, move the
images from the camera and the SD card to your computer, and
then view them using the Kodak dental imaging software with
the acquisition module or any software capable of viewing .jpg
images.
To acquire images using a video monitor, follow these steps:
1 Turn the video monitor on.
2 Turn the camera on by pressing and holding the Power On
button for at least 3 seconds until the green power indicator
is illuminated.
Note: If you are using a wireless camera,
verify the battery power level connection.
See “KODAK 1500 Intraoral Camera
Overview” on page 1.