Filter
Top Products
14 www.kodak.com/go/support
Taking pictures/videos
Using the camera under water
The camera does not float. To prevent it from sinking, secure it with the wrist strap
(see a floating wrist strap at www.kodak.com/go/accessories). To keep the camera
waterproof, tightly close and latch all doors. Do not open doors in water or
when hands are wet. Waterproof integrity may be compromised if the camera is
dropped.
For the best focus and color balance under water:
1 Press the Mode button.
2 Press to choose Underwater Pictures or Underwater Videos, then press OK.
3 When finished taking underwater videos/pictures, go back to Step 1 and choose a
non-underwater setting.
After using the camera in water
■ Wipe off water or debris. If the camera was used in chemically treated water or
saltwater, rinse it in fresh water, then use a soft towel to dry it.
■ If water has entered the camera, remove the card. Allow all components to air-dry
for at least 24 hours before using the camera. See page 46.