EASTMAN Color Internegative II Film 5272
™
/ 7272
™
• H-1-5272 3
Characteristic Curves
Spectral-Dye-Density Curves
Note: While the data presented are typical of production
coatings, they do not represent standards which must be met
by Kodak. Varying storage, exposure, and processing
conditions will affect results. The company reserves the right
to change and improve product characteristics at any time.
F010_0049AC
KODAK WRATTEN Gelatin Filter No. 2B
with KODAK Heat Absorbing Glass, No. 2043,
3.0
R
G
B
Status M
Tungsten (2850 K), 1/100 second
ECN-2
Process:
Exposure:
Densitometry:
2.01.0
4.0
3.0
2.0
1.0
DENSITY
0.0
0.0
1.0
LOG EXPOSURE (lux-seconds)
F010_0051AC
650450350
0.0
250
WAVELENGTH (nm)
550
DIFFUSE SPECTRAL DENSITY
1.0
0.5
2.0
1.5
2.5
750
Typical densities for a midscale neutral subject
and D-min.
ECN-2
Process:
Midscale Neutral
Minimum Density
Spectral-Sensitivity Curves
Modulation-Transfer Curves
These photographic modulation-transfer values were
determined by using a method similar to the one described in
ANSI Standard PH2.39-1977(R1990). The film was exposed
with the specified illuminant to spatially varying sinusoidal
test patterns having an aerial image modulation of a nominal
60 percent at the image plane, with processing as indicated.
In most cases, the photographic modulation-transfer values
are influenced by development-adjacency effects and are not
equivalent to the true optical modulation-transfer curve of
the emulsion layer in the particular photographic product.
700 750650600550500450400350300250
*Sensitivity = reciprocal of exposure (ergs/cm ) required
to produce specified density
WAVELENGTH (nm)
2
LOG SENSITIVITY
3.0
*
2.0
1.0
0.0
1.0
1.0 above D-min
1.4 second
Process:
Effective Exposure:
Densitometry:
ECN-2
Density:
Status M
Yellow-
Forming
Layer
Magenta-
Forming
Layer
Cyan-
Forming
Layer
F010_0050AC
1001 2 3 4 5 10 20 50 200 600
SPATIAL FREQUENCY (cycles/mm)
RESPONSE (%)
10
1
2
5
3
7
30
20
100
70
50
200
F010_0048AC
Densitometry:
Exposure:
Process:
ECN-2
Tungsten
Diffuse Visual