Filter
Top Products
Setting up the Printer
Introduction
Troubleshooting
Site Specifications
Operating the Printer
Accessories and
Supplies
CONTENTS
HELP
SEARCH
For Long Operating Life
Unsuitable materials for cleaning the printer
Paint coat flaking and plastic deformation are likely to occur if the unit is
wiped with chemical dusters, benzine, thinner or any other solvent, if rubber
or PVC items are left in contact with the unit for a extended period, or if the
unit is sprayed with insecticide.
Care of the cabinet
Unplug and clean with a soft cloth slightly moistened with a mild soap and
water solution. Allow to dry completely before operating. Never use
petroleum-base solutions or abrasive cleaners.
Head abrasion
The thermal print head, like a video head, wears out. When it is worn, fine
details of the picture are not printed, requiring replacement of the thermal
head. Consult your dealer about having the head replaced.
Connecting devices
Read thoroughly the Safety Notices, Cautions, and Operating Precautions
of the instruction booklets for the other devices connected with the unit.
Caution on relocating
When transporting this unit, make sure to avoid impacts. Before moving the
unit, make sure to disconnect the power cord from the power outlet and the
cables from the connected devices. Remove the paper tray and ribbon.