Filter
Top Products
Operating the Printer
4-3
Working in Test Print Mode
Making a test print Make a test print to check that the printer is installed and set up correctly.
1. Press Menu once until Test Print Mode appears.
2. Press Enter once until Pattern appears.
3. Press Enter once to select the test print type.
4. Press Menu to cycle through the available test print types.
5. Press Enter to print the selected test print.
When printing is complete, the printer returns to Ready mode.
Changing the quantity
of test prints
1. Press Menu once until Test Print Mode appears.
2. Press Enter once until Pattern appears.
3. Press Menu once until Count appears.
4. Press Enter once to select the test print count.
5. Press Menu to cycle through the number of test print copies you want.
6. Press Clear to accept the value you just selected.
NOTE: The value you selected is the number of test prints you will receive
until the printer is turned off and turned back on.
7. Press Menu once until Pattern appears.
8. Continue with step 3 of “Making a test print” on page 4-3.