Filter
Top Products
16
Infinity focus
Capture sharp, distant scenery when you
take pictures outdoors during the day or
through windows.
Selecting the flash and
picture-taking options
1. Completely lift up the Lens cover/
flash (2) to raise the flash and to turn
on the camera.
2.Keep the subject within the distance
range for the speed of film in your
camera (see Flash-to-subject
distance table on page 17).
• Don’t take pictures beyond the
maximum distance or your pictures
will be dark.
3.Repeatedly press
MODES (20) until the
Mode-selector arrow (26) points to the
Auto-flash indicator (23), Fill-flash
indicator (24) or Flash-off indicator (25),
or until the Infinity-focus indicator (28) or
Nightview indicator (29) appears on the
LCD panel (9).
4.Frame your subject within the
Viewfinder eyepiece (11).
5.Partially press down the Shutter
button (1). When the Flash/camera-
ready lamp (10) glows green, fully
press down the shutter button to
take the picture.
The flash, infinity-focus, and nightview
modes remain selected after you take
the picture. To cancel the selection,
press
MODES to select another setting
or close and reopen the lens cover/flash
to automatically return to the
default setting.
Flash/warning-lamp signals
Lamp Indicator Situation
Glows green • Flash fully charged
Glows red* • Subject closer than
1.3 ft (0.4 m)
“Blinks” red* • Flash not
fully charged
• Camera movement
* See the TROUBLESHOOTING table for
more information.