Filter
Top Products
6
2.Repeatedly press MENU (13) until the
blinking “date format” of your choice
appears on the LCD panel (9).
• The blinking “E” indicates there is no
film in the camera.
3.Press
ENTER (14) to set the format.
• If the camera is already at this format,
you can bypass this step.
4.Press SELECT (18) to actuate the setting
for month.
5. Repeatedly press and/or hold
SELECT to
select the new number for month.
6. Press
ENTER (14) to set the month and
to actuate the setting for day.
• Press ENTER again if you want to end
the selection.
7. Follow steps 4 and 5 to finish setting
the date.
Setting the time (hour/minutes)
The camera has a 12-hour clock with
PM display.
1.Completely lift up the Lens cover/
flash (2) to raise the flash and to turn on
the camera.