Filter
Top Products
Troubleshooting
www.kodak.com/go/support
41
Camera ready light status
Unrecognized file
format
Camera cannot read the
picture format.
Transfer the picture to the
computer (page 15), or delete it
(page 12).
Camera error #XXXX.
See user’s guide.
An error is detected. Turn the Mode dial off, then back
on. If the message reappears,
contact Customer Support
(page 43).
Status Cause Solution
Ready light does not
turn on and the
camera does not
work.
Camera is not turned on. Turn on the camera (page 2).
Batteries are exhausted
or are not charged.
Install new batteries (page 1) or
charge rechargeable batteries.
Mode dial was on when
batteries were reloaded.
Turn Mode dial off, then back on.
Ready light blinks
green.
Picture is being
processed and saved to
the camera.
Camera is operating normally.
Ready light blinks
amber.
Flash is not charged. Wait. Resume picture taking when
the light stops blinking and turns
green.
Camera is initializing.
Ready light blinks red
and camera turns off.
Batteries are low or
exhausted.
Install new batteries (page 1) or
charge rechargeable batteries.
Message Cause Solution