Filter
Top Products
64
Chapter 9
Installing the Custom Camera Insert
A universal insert is pre-installed in the camera dock. It allows all Kodak
EasyShare CX/DX6000 series and LS600 series cameras to use the camera
dock.
A custom insert is included with your camera. It provides a perfect fit for
your Kodak EasyShare CX6200 digital camera.
Remove the Universal Insert
1 Place your thumbs in the indents in the
front of the universal insert; press in and
lift.
2 Lift the insert at the side edge and remove
the insert from the dock.
3 Save the universal insert as a spare.
Install the Custom Insert
1 Position the custom insert so the cutout
lines up with the connector on the camera
dock.
2 Fit the insert into the groove in the dock and
snap it into place.
You can purchase a custom insert for your
camera at dealer of Kodak products. See
www.kodak.com/go/cx6200accessories.
Cutout
Connector