Filter
Top Products
40
Chapter 5
Setting Video Out
The Video Out feature lets you match the camera’s video signal to the standard
for your location. Video Out must be set correctly to run a slide show on an
external device (see page 30).
1 In Capture or Review mode, press the Menu button.
2 Highlight Setup , then press the Select button.
3 Highlight Video Out , then press the Select button.
4 Highlight an option:
NTSC—used in the United States and Japan
and most countries outside of Europe.
PAL—used in European countries.
5 Press the Select button to accept the change
and return to the Setup menu.
6 Press the Menu button to turn off the menu.
This setting remains until you change it.