Filter
Top Products
85
Chapter 10
Read only card, change
to internal memory to
capture
The card in the camera
is write-protected.
To take a picture, insert a
new card or change storage
location to internal
memory (page 11).
Card is protected
(Reset switch on card)
Switch on card is in
write-protect position.
Reset the switch as shown
on camera screen.
Card is locked (Insert
a new card)
The card is
write-protected.
To take a picture, insert a
new card or change storage
location to internal
memory (page 11).
Card is unusable
(Insert a new card)
The card is slow,
corrupted, or
unreadable.
Insert a new card
(page 10).
Recording stopped.
Record in internal
memory (Card speed is
slow)
Card cannot be used to
take videos.
Change storage location to
internal memory
(page 11). Use this card to
take pictures only.
Date/Time entry screen
appears automatically
This is the first time you
turned on the camera;
or the battery has been
removed for an
extended period of
time; or the battery is
exhausted.
Reset the clock (page 8).
High camera
temperature. (Camera
will be turned off.)
The internal
temperature of the
camera is too high for
the camera to operate.
The viewfinder light
glows red and the
camera turns off.
Leave the camera off for
several minutes, then turn
it back on.
If the message reappears,
contact Customer Support
(page 90).
Message Cause Solution