Kodak M1093 IS Digital Camera User Manual


 
www.kodak.com/go/support 45
6 Troubleshooting
IMPORTANT:
Your camera offers an on-board Help system. To get the most from your
camera, see page 49.
Camera problems
Status Solution
Camera does not
turn on
Make sure the battery is charged and installed correctly (see
page 1).
Turn the camera off, then on again.
Camera does not turn
off
Camera buttons and
controls do not
function
In Review, a blue or
black screen is
displayed instead of
a picture
Transfer
all
pictures to the computer (see page 37).
Take another picture.
Pictures remaining
number does not
decrease after taking a
picture
Continue taking pictures. The camera is operating normally.
(The camera estimates the number of pictures remaining after each
picture is taken, based on picture size and content.)
Flash does not fire Check the flash setting, and change as needed (see page 7).
NOTE: The flash does not fire in all modes.
Memory card is almost
or entirely full
Transfer the pictures to the computer (see page 37).
Delete pictures from the card or insert a new card.
The battery does not
charge using USB
charging
See page 2 or visit www.kodak.com/go/USBcharging.
Insert a new battery (see page 1).