Filter
Top Products
Not For Resale
–
Free Download at
http://homepage.ntl
world.com/joechan/
manuals
59
Flash as fill-in: In shutter priority: all shutter speeds
from 4s to 1/90 s, with faster shutter speed settings
automatic switchover to 1/100 s.
Automatic switchover between flash as main light
source and fill-in flash:
In automatic program mode: automatic switchover to
1/100s. Flash intensity dosaged via TTL-control
metering, depending on ambient light (flash as main
light source, fill-in flash or no flash effect).
Flash exposure metering: center-weighted, integral.
Photocell for TTL-flash exposure control: Silicon
photodiode, next to photocell of exposure meter,
protected from stray light in lower part of camera.
Film speed range for TTL flash-exposure control:
ISO 12/12° to ISO 3200/36°.
Exposure override for flash exposure metering:
plus/minus 3 Ev in half-values.
Shutter: Electronically controlled focal-plane blade
shutter, vertical action.
Shutter speed setting dial: easy-reach 6.5mm height;
centrally positioned exposure release button.
Electronically computed shutter speeds: For
automatic programs continuous from 16s to 1/2000 s.
Manual settings from 4s to 1/2000 s in half values.
Mechanical shutter-speed settings:
"100
" = 1/100s flash synchronization, or in case of
battery failure. "B" for time exposures of any length.
(Exposures in "B"-setting electronically controlled
when using drive in 4 fps setting)
Mirror system: Semi-transparent, vacuum coated
swing mirror, coated with 17 layers, reflects 70% and
transmits 30% light, backed by Fresnel reflector (1345
micro-reflectors) to concentrate light on exposure
meter's photocell.
Film transport: Single-movement quick-wind lever
(130° movement), optional MOTOR-W1NDER-R (2
fps) or MOTOR-DRIVE-R (single frame, 2fps, 4fps).
Frame counter at top of camera: frame count in
ascen-ding values. Automatic reset to "0" when camera
back is opened. Built-in reading magnifier.
Multiple exposures:
Press rewind locking button.
Auto- matic reset when shutter is cocked; exposure
counter does not move forward. Any number of
exposures possible. Multiple exposures also possible
with motorized film advance units.
Film rewind:
via hinged crank lever at top left of
camera.
Shutter release: Shutter-release button with standard
thread for cable release. Press down 0.3mm to first
pressure point to switch on (viewfinder LEDs light,
exposure meter switched on). Press down approx. 0.9
mm to second pressure point to activate memory for
exposure metering value. Press down approx. 1.35mm
for electromagnetic shutter release for electronically
computed exposures. Press down approx. 2mm for
mechanical release ("B" and "100
").