Filter
Top Products
18 www.kodak.com/go/support
4 Doing more with your camera
Using optical zoom
1 Use the LCD to frame your subject.
When you turn on the camera, it is set to ultra-wide
(23 mm) for the widest field of view.
2 Press Telephoto (T) to zoom.
The zoom indicator shows the zoom status. The slider
pauses at the top of the ultra-wide range (38 mm).
■ To zoom into optical zoom range (39-117 mm),
release Telephoto (T) and press it again.
■ To zoom out, press Wide Angle (W).
3 Take the picture or video.
NOTE: Optical zoom is effective when the lens is no closer than:
24 in. (60 cm)
11.8 in. (30 cm) in telephoto close-up/macro mode
2 in. (5 cm) in wide close-up/macro mode
31.5 in. (80 cm) in ultra-wide
Using digital zoom
Use digital zoom in any picture-taking mode to get up to 4X magnification beyond
optical zoom. (You cannot use digital zoom for video recording.)
1 Press Telephoto (T) until the slider is at the top of the optical zoom range. Release
Telephoto (T), then press it again.
2 Take the picture.
NOTE: You may notice decreased image quality when using digital zoom. The slider pauses and turns red
when the picture quality reaches the limit for an acceptable 4 x 6-in. (10 x 15 cm) print.
Digital zoom range
Optical zoom range
(39-117 mm)
LCD zoom indicator
D
T
W
UW
Wide range (24-38 mm)
Ultra-wide (23 mm)