Filter
Top Products
26 www.kodak.com/go/support
Doing more with your camera
Changing picture-taking settings
You can change settings to get the best results from your camera. (Some settings are
unavailable in some modes.)
1 Press the Menu button.
2 Press to highlight a setting, then press the OK button.
3 Choose an option, then press the OK button.
Setting Options
Self-Timer
A picture is taken 10 seconds after
the Shutter button is pressed.
(Place camera on a tripod or flat
surface.)
This setting remains until you take a
picture or video.
Off (default)
On
Press the Shutter button halfway, then completely
down. To stop the self-timer before the picture is taken,
press the Shutter button all the way down. (Use the Menu
button to cancel the self-timer.)
Use the same procedure to take a self-timer video, but
press the Shutter button completely down.
NOTE: The video stops when no storage space remains.
Burst
Camera takes up to 4 pictures
while the Shutter button is
pressed.
Capture an expected event, such
as a person swinging a
golf club.
Off (default)
On
NOTE: Press the Shutter button
halfway
to focus and set
exposure. Press the Shutter button
completely down
and hold it
to take pictures.
The camera stops taking pictures when you release the Shutter
button, when all pictures are taken, or when there is no more
storage space.
During Burst, the flash is set to Off.
During quickview, you can delete all pictures in a burst
series.