Konica Minolta DYNAX 4 Digital Camera User Manual


 
DETAILED
OPERATION
93
TTL metering (Through The Lens):
The TTL flash metering system controls the flash during the
exposure automatically.
Pre-flash metering:
In combination with TTL metering, a pre-flash fires before the
main exposure. The pre-flash is metered with 14 segment
honeycomb pattern and fed back to the flash exposure sys-
tem to determine the reflectance of the scene.
ADI metering (Advanced Distance Integration):
Flash metering is controlled by distance information from D
series lenses in addition to TTL metering. With the 5600HS
(D) and 3600HS (D) accessory flash units, a pre-flash is also
used. With ADI metering, flash output is less influenced by
background conditions or the subject’s reflectance.
When pre-flash fires, a flash/color meter cannot meter accurately. This
is because the purpose of pre-flash is to assist ADI/Pre-flash meter-
ing, not to provide illumination for the picture.
Cancel HSS function of the
program flash (see flash manual) or eliminate the influence on metering using
Custom 11-2 (p. 111). However, if you use the test-flash button on the
flash, the pre-flash will not fire.
Use of a Flash/Color Meter with Pre-Flash
When Using a Close-up Diffuser, Certain Filters and Lenses
When close-up diffuser CD-1000, or a filter whose stop’s increase is
not 0 (i.e., ND) is used, or when the focus-range limiter or macro release
of certain lenses are used, the proper exposure will not be obtained by
ADI or Pre-flash metering.
Cancel HSS function of the program flash (see
flash manual) or eliminate the influence on metering using Custom 11-2 (p.
111).
92
When an off-camera cable or bounce flash is used, the TTL metering mode
will be automatically set.
High-speed sync does not work with this camera even when the flash has the
high-speed sync function. However, when using the (D) flash, turn the HSS
on in order to fire the pre-flash for ADI or DI metering.
Flash Metering
Flash metering changes according to the flash unit and lens being used.
FLASH
The accessory flash units fit in the shoe located on
the top of your camera.
Attaching the Program Flash
Other lensD lens
5600HS(D)
3600HS(D)
Built-in
flash
TTL metering
5400HS
Pre-flash
metering
Other
flashes
TTL metering
ADI metering
with pre-flash
Pre-flash
metering
Pre-flash
metering
ADI metering
without pre-flash
TTL metering