Filter
Top Products
8988
SYSTEM ACCESSORIES
(sold separately)
Marine Case MC-DG110
Protects the camera down to a depth of 30m (approximately
100ft.) underwater. The extremely compact shell retains the
camera’s portability while protecting it from the elements on
land or sea. All camera operations are available when the case
is sealed. Availability depends on the region. Contact your local
dealer or an authorized Minolta Service Facility for details.
AC Adapter AC-4 or AC-5
The AC adapter allows the camera to be powered from a household outlet. The AC
adapter is recommended when the camera is interfaced with a computer or during peri-
ods of heavy use. AC adapter model AC-4 is for use in North America, Japan and
Taiwan, and AC -5 is for use in all other regions.
Others
Camera Case CS-DG-110
Metal Chain Neck Strap
Lithium-ion Battery NP-200
1.Insert a memory card in the camera and connect it to the computer with the USB
cable. Other devices must not be connected to the computer during this procedure.
2.Right click on the My-computer icon. Select “properties” from the drop-down menu.
Windows XP: from the start menu go to the control panel. Click on the performance
and maintenance category. Click “System” to open the system properties window.
3. Windows 2000 and XP: select the hardware tab in the properties window and click
the device-manager button.
Windows 98 and Me: click the device-manager tab in the properties window.
4.The driver file will be located in the universal-serial-bus-controller or other-devices
location of the device manager. Click on the locations to display the files. The driver
should be indicated with the camera name. Under certain conditions, the driver name
may not contain the camera name. However, the driver will be indicated by either a
question mark or exclamation point.
5. Click on the driver to select it.
6.Windows 2000 and XP: click on the action button to display the drop-down menu.
Select “uninstall.” A confirmation screen will appear. Clicking “Yes” will remove the
driver from the system.
Windows 98 and Me: click the remove button. A confirmation screen will appear.
Clicking “Yes” will remove the driver from the system.
7.Disconnect the USB cable and turn off the camera. Restart the computer.
Removing the driver software - Windows
TROUBLESHOOTING