Konica Minolta Dynax 60 Digital Camera User Manual


 
3
36
SHUTTER PRIORITY - S
Shutter priority allows the photographer to specify the
shutter speed; the camera sets the appropriate
aperture for the required exposure. Shutter speeds
not only control exposure, but also the apparent
sharpness of moving objects, see page 30.
If the required exposure is beyond the
aperture range, the aperture display
blinks on the data panel and in the
viewfinder. Adjust the shutter speed until
the display is steady.
Turn the control dial (1) to adjust the shutter
speed between 30 and 1/2000 second The
speeds can be seen on the data panel and in the
viewfinder.
Pressing the shutter-release button
partway down (2) displays the
corresponding aperture. Press the
shutter-release button all the way
down to take the picture.
2
1
Shutter
speed
To use fill flash, press the flash-mode (3)
button to raise the flash. The shutter
speed cannot exceed the flash-sync
speed of 1/90 second.
Flash range is dependent on the
aperture, see page 25. To cancel the
flash, push the flash head down.
ADVANCED OPERATION