Filter
Top Products
103
Connect the camera to the printer using the camera’s USB cable. The larger
plug on the cable is connected to the printer. Open the card chamber door and
insert the smaller plug of the cable into the camera. Turn the camera on; the
USB Direct Print screen is displayed automatically.
Use the left/right keys of the controller to dis-
play the image to be printed.
The number of prints in the print run are displayed on the LCD monitor. Use
the left/right keys to highlight “Yes,” and press the center of the controller to
start printing.
Number of prints in the print run.
Number of copies of the displayed image.
Strike through indicates unprintable file type.
Repeat the previous steps until all the images
to be printed are selected. Press the central
button of the controller to begin the printing
routine.
Press the up key to select the number of
copies to be printed. To deselect an image for
printing, press the down key until the number
of copies reaches zero.
Once printing begins, the operation can be canceled by pressing the center
of the controller. The printing-finished message indicates the end of the
operation; turn the camera off to end the routine.
The information (i+) button switches
between the single frame and index play-
back formats.
:move :sel. :print
Print file?
Number of prints: 7
No
Yes
Printing finished.
OK