Konica Minolta SY-A308 Digital Camera User Manual


 
110
A
PPENDIX
Storage
Store in a cool, dry, well-ventilated area away from dust and chemicals. For long periods of disuse,
store the camera in an airtight container with a silica-gel drying agent.
Remove the batteries and memory card from the camera when not in use for extended periods.
Do not store the camera in an area with naphthalene or mothballs.
During long periods of storage, operate the camera occasionally. When taking the camera out of
storage, check that the camera is functioning properly before using.
Cleaning
•If the camera or the outside of the lens is dirty, gently wipe it with a soft, clean, dry cloth. If the
camera or lens comes in contact with sand, gently blow away loose particles. Wiping may scratch
the surface.
•To clean the lens surface, first blow away any dust or sand, then gently wipe the lens with a cloth
or tissue designed for optics. Use lens-cleaning fluid if necessary.
•Never use organic solvents to clean the camera.
•Never touch the lens surface with your fingers.
LCD monitor care
Although the LCD monitor is manufactured using high precision technology, there may occasionally
be a lack of color or bright points on the monitor.
Do not apply pressure to the surface of the LCD monitor; it may be permanently damaged.
In cold temperatures, the LCD monitor may become temporarily dark. When the camera warms up,
the display will function normally.
The LCD monitor may be slow to react in low temperatures or may turn dark in a hot environment.
When the camera reaches normal operating temperature, the display will function normally.
If fingerprints are on the LCD monitor surface, gently wipe with a soft, clean, dry cloth.