Filter
Top Products
14 15
INSTALLING THE BATTERY CHECKING THE BATTERY POWER
Your camera uses one 3-volt CR-2 lithium
battery to supply power for all camera
operations.
1.Open the battery chamber as
shown.
2.Insert the battery into the chamber
as indicated by the + and – marks.
3.Close the battery chamber.
• After installing a new battery, reset the date
and time (p. 44).
Each time the main switch is turned on, a symbol will appear in the data
panel to indicate the power status of the battery.
• If no display appears, replace the battery or check that it is inserted correctly.
• To save power, your camera will shut down and retract the lens if it is not operated
for more than eight minutes. Press the main switch to restore power.
• Do not obstruct the lens while it is retracting.
Power is sufficient
for all camera
operations.
Power is sufficient,
but the battery will
have to be replaced
soon.
Replace the battery.
The shutter will lock
until the battery is
replaced.