Filter
Top Products
18 19
CHECKING THE BATTERY
LOADING FILM
Your camera uses IX240 type film designed for use in Advanced Photo
System cameras.
• Your camera’s automatic transport system loads the film, sets the film
speed, and advances the film after each exposure.
• Use film from ISO 25-3200. Your camera will automatically set the proper
ISO.
• After loading, the film chamber cannot be opened until rewind has been
initiated.
• DEP, Double Exposure Prevention, prevents the camera from accepting
exposed film.
• This camera will only load film with the mark current.
• If no display appears, replace the battery or check that it is inserted
correctly.
• Auto Power Off: The data panel will shut off and the lens will retract if the
camera is not operated for more than eight minutes. Press the main switch
to restore power.
• Do not obstruct the lens while it is retracting.
Continued on following page.