Filter
Top Products
16 17
INSTALLING THE BATTERY CHECKING THE BATTERY
Your camera uses one 3-volt CR-2 lithium
battery to supply power for all camera
operations.
1. Open the battery chamber as shown.
Each time the main switch is turned on, a symbol will appear in the data
panel to indicate the power status of the battery.
Briefly appears. Power is sufficient for all camera
operations.
Power is sufficient, but the battery must be
replaced soon.
Replace the battery. The shutter will lock until
the battery is replaced.
Continued on following page.
2. Insert the battery into the chamber as
indicated by the + and – marks.
3. Close the battery chamber.
• After installing a new battery, reset the date and
time (p. 48).