Filter
Top Products
26 27
FULL-AUTO OPERATION
5. When the green ready lamp glows,
press the shutter-release button all-
the-way down to take the picture.
• Press the shutter-release button with a
slow steady squeeze - never a quick jab.
3. Looking through the viewfinder, frame
the subject as desired.
Press the W zoom button to zoom out.
Press the T zoom button to zoom in.
• Do not hold or obstruct the lens barrel.
4. Center your subject in the focus frame,
then press the shutter-release button
partway down.
• If the ready lamp does not glow, the flash is not charged. Wait until it glows,
then take the picture.
• If the ready lamp blinks quickly and the shutter is locked, your subject is too
close (p. 30).
• Zoom position may change a little when the shutter-release button is
pressed all-the-way down, but the picture will be taken with your first
framing.
• Press the main switch and turn the camera off after use.