Filter
Top Products
6-6
6
G Using the SET UP Mode Functions
Forgetting to switch the camera off can cause the camera’s battery charge to fall to a low
level. For this reason, the camera features a Power Save function that automatically
switches the camera off after several minutes if it is left switched on.
You can specify the delay until the camera is switched off.
3 Press
U
on the 4-way button to select
[EXECUTE] and then press the OK button
E
.
Card initialization begins.
4 When initialization is completed, the screen in step 2
reappears.
[POWER SAVE]
Switching the Camera Off
Automatically to Save Power
1 Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2 Press
U
or
D
on the 4-way button to select
[POWER SAVE] and then press
R
.
3 Press
U
or
D
on the 4-way button to select
the delay until the camera switches off and
then press the OK button
E
.
NO PWR OFF: The camera is not automatically switched
off. Take care to remember to switch the
camera off yourself.
1MIN.: The camera switches to sleep mode after 1
minute and switches off 2 minutes later.
3MIN.: The camera switches to sleep mode after 3
minutes and switches off 2 minutes later.
(default)
6MIN.: The camera switches to sleep mode after 6
minutes and switches off 2 minutes later.
4 The delay time is set and the screen in step 2 reappears.
Finecam_E.book Page 6 Thursday, August 28, 2003 6:21 PM