Filter
Top Products
6-11
6
G Using the SET UP Mode Functions
• Because the selected image is stored in the camera’s memory, switching memory cards or
erasing the image from the memory card does not affect the image set in the startup screen.
Use this procedure to have the camera display images for several seconds immediately
after you shoot them.
5 Press
L
or
R
on the 4-way button to select
the desired image and then press the OK
button
E
.
Selecting [RESET] restores the settings in step 3.
6 Use
U
on the 4-way button to select [SET]
and then press the OK button
E
.
7 Press
L
or
R
on the 4-way button to select
the middle image and then press the OK
button
E
.
8 The screen for step 2 reappears.
[REC REVIEW]
Checking Images Right After You Shoot Them
1 Switch the camera on and press
O
or
Q
on the mode
button until the “
G
” icon lights on the mode select LED.
2 Press
U
or
D
on the 4-way button to select
[REC REVIEW] and then press
R
.
Finecam_E.book Page 11 Thursday, August 28, 2003 6:21 PM