2-21
2
Basic Operations
• When the camera is connected to a computer and you are viewing or copying images, the
card access LED flashes. Do not disconnect the USB cable or switch the computer off
while viewing or copying images.
• When the camera is connected to the Macintosh and the two are communicating so that data can
be exchanged, the self-timer LED lights.
• If [PC MODE] is displayed on the LCD monitor but no [untitled] or [NO_NAME] icon
appears, check that the USB cable is securely connected.
4 Press the POWER button
H
to
switch the camera on.
[PC MODE] is displayed on the LCD monitor and
you can check the images stored on the camera’s
memory card on your Macintosh and copy the
images to your Macintosh.
5 An [untitled] disk icon appears on the desktop. Double-click
the icon to open the disk window.
* Displayed as [NO_NAME] in Mac OS 10.0 to 10.2.x.
6 Open the [100KCBOX] or [RESIZE] folder in DCIM folder and
then select the image you want to view from the files and
double-click the image.
• A number between 100 and 999 is substituted for "100" in the [100KCBOX] folder name.
( p.6-13)
Finecam_E.book Page 21 Thursday, August 28, 2003 6:21 PM