Kyocera TASKalfa4550ci Photo Scanner User Manual


 
E
EcoPrint Imaging feature that changes toner saturation, making the entire image,
text and graphics, appear lighter in the printed job. The actual amount of toner used
depends on the printing system mode and the type of data printed (text, graphics, or
both). You can choose to save toner by sliding the Toner save level bar from the left
(least amount of toner saved) to the right (most amount of toner saved). EcoPrint does
not increase print speed. This feature is also available in the Quick Print and Basic
tabs.
Edit Quick Print This feature lets you customize the Quick Print view with your
preferred print job options.
e-MPS Job storage (e-MPS) is a set of options for saving print jobs in printing
system memory, so that you can print or reprint them later. Print jobs can easily be
reprinted later from the printing system’s operation panel, and printing of sensitive
documents can be restricted to approved users.
Enable client profile Client profile refers to profile settings saved on a server and
accessed by clients in a client/server environment. This feature in the Advanced tab
lets an administrator control and distribute profiles.
F
Fast printing Printing mode that decreases spool size and increases print speed.
Finishing edge Finishing edge aligns the matching sides of two different page
sizes in a document. For example, the long edge of an A4 page is aligned with the
short edge of an A3 page; or the short edge of a letter size page is aligned with the
short edge of a legal size page. Finishing edge can be used with or without the staple
feature.
Full bleed Layout feature that lets you produce full-page printing without any
margins by printing to a larger sized-paper than the original, and then letting you trim
the edges.
G
GDI compatible mode A page description language option that accurately
reproduces what is viewed on the screen using the Microsoft Graphical Device
Interface (GDI) component to render the document. It generates data in a raster
printing format, creating a larger printable file.
Gutter Blank space on the left side or top of a printed page that can be increased
by scaling down text and graphics. This supports stapling and hole punching. When
used with Duplex printing, the enlarged blank space lines up evenly on both sides of
the sheet. The larger blank space is created by shifting the printable area to the right
or down as much as one inch (25.4 mm).
J
Job accounting An accounting system that records and controls the number of
pages printed by each account ID. Account IDs can be assigned at the printing system
and stored in the driver. After account IDs are assigned, you can use the Job
accounting option to print in the Job accounting mode.
Job name A Job name is a unique identifier for each print job, to help you find and
print the job from the printing system’s operation panel. When you send a print job
using one of the Job storage (e-MPS) options, you can assign a custom name to the
job or use the name of the application file.
Job storage Job option that stores a print job permanently on a hard disk for
printing later. You also have the option of protecting the print job from unauthorized
KX DRIVER
ii