Filter
Top Products
91
2.1.5 Battery charge level
a. :
Sufficient capacity
b. :
Falling capacity
c. :
Insufficient capacity
d. :
Replacement or recharging necessary
2.1.6 Frame counter (Number of remaining pictures)
(If memory capacity is low, 0 flashes as a warning)
2.1.7 Indication that internal memory is used to store images
(when no memory card is inserted)
2.1.8 Spot autofocus metering field
(alternatively to 2.1.9)
2.1.9 Normal autofocus metering field
2.1.10 Indication that spot exposure metering is switched on
2.1.11 Self-timer switched on/ running
(alternativ zu 2.1.9/2.1.10/2.1.12)
a. :
2 seconds delay
b. :
12 seconds delay
2.1.12 Enlarged central section of the image
(appears only with manual focusing)
2.1.13 Histogram
(appears only when activated, yellow when ash unit is switched on, and/or with shutter
speeds slower than 1/2s, otherwise white)
2.1.14 Flash exposure compensation set, including compensation value
(appears in the area of 2.1.37 with autofocus mode)
2.1.15 Indication of program shift option / for setting the slowest shutter
speeds with the setting dial
(appears only with programmed automatic exposure mode / only when shutter speed dial
is set to
2+)
2.1.16 Indication of shifted pair of values
(appears only with programmed automatic exposure mode and after shifting)
2.1.17 Shutter speed
(appears immediately with manual setting, i.e. with speed priority and manual modes,
after tapping the shutter release button with automatic setting, i.e. with programmed au-
tomatic exposure and aperture priority modes, red after pressing the shutter release but-
ton to the pressure point when the setting range is exceeded with programmed automatic
exposure, aperture priority and speed priority modes, otherwise white)
2.1.18 Light balance
(alternatively to 2.1.19, appears only with manual setting of shutter speed and aperture)
2.1.19 Distance / depth of eld scale
(appears only with manual focusing, with meter and feet graduations)
2.1.20 Aperture value
(appears immediately with manual setting, i.e. with aperture priority and manual modes,
after tapping the shutter release button with automatic setting, i.e. with programmed
automatic exposure and speed priority modes, red after pressing the shutter release but-
ton to pressure point when the setting range is exceeded with programmed automatic
exposure, aperture priority and speed priority modes, otherwise white)
2.1.21 Exposure compensation set, including compensation value
(not with manual setting of shutter speed and aperture)
2.1.22 Exposure metering method
a. :
Center-weighted exposure metering
b. :
Multi-field metering
c.
:
Spot metering
2.1.23 Automatic exposure bracketing
2.1.24 Image stabilization
2.1.25 Focusing mode
a. AF:
Autofocus
b. MF:
Manual focusing