Filter
Top Products
113
AUTOMATIC STAND-BY MODE
If active, this function switches the camera to stand-by mode after the selected
time to save power.
In the menu, select
Auto Power Off
(3.24), and in the submenu the desired
setting.
Note:
Even if the camera is in stand-by mode, it can be turned on again at any time
by pressing the shutter release button (1.8) or by turning it off and back on
with the main switch (1.7).
KEY ACKNOWLEDGEMENT (RESPONSE) AND SHUTTER SOUNDS
With the Leica X2, you can decide whether you want your settings and other
functions to be acknowledged by an acoustic signal – two volumes are avail-
able, or whether operation of the camera and actually taking photographs
should be predominantly free of noise.
For shutter sounds
In the menu, select Shutter Volume (3.29), and in the submenu the desired
setting, Off, Low, or High.
For key acknowledgement and memory card capacity limit
sounds
In the Menu, select Acoustic Signal (3.30), in the first submenu Volume, and
in the second level submenu the desired setting, Off, Low, or High.
The sounds acknowledging key presses and a memory card capacity limit can
be switched on or off separately in the respective submenus Keyclick and SD
card full.