Filter
Top Products
2 / Firmware Update 2.3.0.0
Instructions for installing the
rmware
Step 1:
Check the current rmware version
Leica recommends updating the rmware on your camera if it
is no longer running the latest version.
1. Turn on the camera.
2. Open the camera menu with one of the function buttons
and select the "Firmware" option in the "Setup" category
using the setting dial.
3. Press the setting dial. The camera and lens rmware
versions are displayed.
4. If the camera is not running the latest rmware version
2.3.0.0, we recommend that you carry out an update:
Camera Leica S (Type 006)
Version 2.3.0.0
5. Turn the camera o again.
Step 2:
Download the latest rmware
1. Download the le S_006_2_3_0_0.FW and save it on your
computer / desktop.
Note:
If the le has not been completely downloaded from the
Internet, a corresponding message is displayed. In this case,
attempt to download the le again.