LevelOne WCS-2030 Security Camera User Manual


 
19
Fix the IP address
Check "Reset IP address at next boot" will force Network Camera to reconfigure its
IP address whenever it reboot. If you want the Network Camera to use a fixed IP,
please uncheck the "Reset IP address at next boot" and assign a valid IP address.
If you select more than one device, changing the IP address is not allowed and the IP
address field will be disabled.
Basic Network Settings
You can setup the network setting by this page. Usually this is no need to be changed,
if you do change it please make sure you input the correct setting or the device may not